磁光平面波导的单向传播特性

表面磁等离子体(surfacemagnetoplasmons,SMPs)是一种在电介质和偏置磁场作用下磁光材料界面处传播的近场电磁波.其独特的非互易传播特性引起了大量科研工作的关注,但在具体的波导结构设计上仍存在很多问题.本文研究了一种银-硅-磁光材料的3层平面波导结构,SMPs在磁光材料和硅的界面处传播,发现在特定的频率范围内,SMPs的基模及高阶模式均具有正向或反向的单向传播特性.分别计算了旋磁与旋电材料平面波导的色散方程,研究了硅层厚度与外加磁场对能带结构及SMPs单向传播区域的影响,发现无论是旋磁或旋电材料的结构,硅层厚度的增加使高阶模式使高阶模式出现在更低的频率位置,使单向传输带宽变小甚至消失,外加磁场的变大使磁光材料的能带结构频率增大的同时带隙中也引入了高阶模式.计算了2种磁光材料平面波导的正向和反向的单向传播带宽宽度,发现旋磁材料YIG的单向SMPs模式出现在GHz波段,最大单向带宽可达到2.45 GHz;旋电材料InSb的单向SMPs模式出现在THz波段,最大单向带宽达到3.9 THz.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

Competitive Metal Coordination of Hexaaminotriphenylene on Cu(111) by Intrinsic Copper Versus Extrinsic Nickel Adatoms

The interplay between the self-assembly and surface chemistry of 2,3,6,7,10,11-hexaaminotriphenylene (HATP) on Cu(111) was complementarily studied by high-resolution scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) under ultra-high vacuum conditions. To shed light on the competitive metal coordination, comparative experiments were carried out on pristine and nickel-covered Cu(111). Directly after room-temperature deposition of HATP onto pristine Cu(111), self-assembled aggregates were observed by STM, and XPS results indicated still protonated amino groups. Annealing up to 200 °C activated the progressive single deprotonation of all amino groups as indicated by chemical shifts of both the N 1s and C 1s core levels in the XP spectra. This enabled the formation of topologically diverse π–d conjugated coordination networks with intrinsic copper adatoms. The basic motif of these networks was a metal–organic trimer, in which three HATP molecules were coordinated by Cu₃ clusters, as corroborated by the accompanying density functional theory (DFT) simulations. Additional deposition of more reactive nickel atoms resulted in both chemical and structural changes with deprotonation and formation of bis(diimino)–Ni bonded networks already at room temperature. Even though fused hexagonal metal-coordinated pores were observed, extended honeycomb networks remained elusive, as tentatively explained by the restricted reversibility of these metal–organic bonds.     

Critical Trace Trudinger-Moser Inequalities on a Compact Riemann Surface with Smooth Boundary

In this paper, the author concerns two trace Trudinger-Moser inequalities and obtains the corresponding extremal functions on a compact Riemann surface (Σ, g) with smooth boundary ?Σ. Explicitly, let λ₁(?Σ) = inf u∈W^1,2 (Σ,g),R ?Σ udsg=0,u6≡0 R Σ(|?gu|2 + u2 )dvg R ?Σ u2 dsg and H = n u ∈ W^1,2 (Σ, g) : Z Σ(|?gu|2 + u2 )dvg ? α Z ?Σ u2dsg ≤ 1 and Z ?Σ u dsg = 0o ,where W^1,2 (Σ, g) denotes the usual Sobolev space and ?g stands for the gradient operator.By the method of blow-up analysis, we obtain sup u∈H Z ?Σ e πu2 dsg ( < +∞, 0 ≤ α < λ1(?Σ),= +∞, α ≥ λ1(?Σ).Moreover, the author proves the above supremum is attained by a function uα ∈ H∩C∞(Σ)for any 0 ≤ α < λ1(?Σ). Further, he extends the result to the case of higher order eigenvalues. The results generalize those of [Li, Y. and Liu, P., Moser-Trudinger inequality on the boundary of compact Riemannian surface, Math. Z., 250, 2005, 363–386], [Yang,Y., Moser-Trudinger trace inequalities on a compact Riemannian surface with boundary,Pacific J. Math., 227, 2006, 177–200] and [Yang, Y., Extremal functions for TrudingerMoser inequalities of Adimurthi-Druet type in dimension two, J. Diff. Eq., 258, 2015,3161–3193]     

Ammonia Oxidation Enhanced by Photopotential Generated by Plasmonic Excitation of a Bimetallic Electrocatalyst

We study how visible light influences the activity of an electrocatalyst composed of Au and Pt nanoparticles. The bimetallic composition imparts a dual functionality: the Pt component catalyzes the electrochemical oxidation of ammonia to liberate hydrogen and the Au component absorbs visible light by the excitation of localized surface plasmon resonances. Under visible-light excitation, this catalyst exhibits enhanced electrochemical ammonia oxidation kinetics, outperforming previously reported electrochemical schemes. We trace the enhancement to a photochemical potential resulting from electron–hole carriers generated in the electrocatalyst by plasmonic excitation. The photopotential responsible for enhanced kinetics scales linearly with the light intensity—a general design principle for eliciting superlative photoelectrochemical performance from catalysts comprised of plasmonic metals or hybrids. We also determine a photochemical conversion coefficient.     

Effectively promoted catalytic activity by adjusting calcination temperature of Ce-Fe-Ox catalyst for NH3-SCR

A series of Ce-Fe-O_x catalysts prepared by the different calcination temperatures (marked as CF-X, where X represented calcination temperature) were used to the selectivity catalytic reduction of NO_x by NH₃. The results explained the relationship between calcination temperature and the sulfate species over Ce-Fe-O_x, and then investigated the surface acidity and catalytic performance. The large amounts of sulfate species were formed over CF-450 and CF-550 while it was decomposed with further the increasing of calcination temperature, which resulted in the loss of surface acidity, causing a decrease in the catalytic activity over Ce-Fe-O_x. Thereby, the CF-450 catalyst showed the best catalytic activity and over 90% NO_x conversion was obtained at 244–450 °C. Besides, the favored pore structure, more Fe³⁺ active species, higher Ce³⁺ concentration and the abundance of chemical adsorbed oxygen species, as well as the surface acid sites, would together contribute to the excellent catalytic activity of CF-450 catalyst.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

Efficient removal of As(V) from simulated arsenic-contaminated wastewater via a novel metal–organic framework material: Synthesis,structure, and response surface methodology

A novel metal–organic framework material {[N(C₂H₅)₃][Zn₂(ptmda)₂(μ₂-H₂O)]·(H₂O)_0.5}_n { GUT-3 ; H₂ptmda is 4,4′-([p-tolylazanediyl]bis [methylene])dibenzoic acid} was successfully synthesized using the hydrothermal method and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. GUT-3 has a two-dimensional network based on dinuclear [Zn₂(ptmda)₂(μ₂-H₂O)]⁻ building units which formed an eightfold interpenetration network in GUT-3 molecules. Hirshfeld surface analysis revealed that H–H, C–H, and O–H bonds accounted for the majority of intermolecular interactions. Moreover, the interactions between GUT-3 and As(V) – the form of As(V) is AsO₄³⁻ – were analyzed in aqueous solutions in a batch system to study the effect of pH, concentration, adsorbent dose, adsorption time, adsorption temperature, and shaking speed. The kinetic and isotherm data of arsenic adsorption on GUT-3 were accurately modeled by pseudo-second-order, Langmuir (q_m = 33.91 mg/g), and Freundlich models. The Box–Behnken response surface method was used to optimize the adsorption conditions of As(V) from the simulated arsenic-contaminated wastewater. The effect of various experimental parameters and optimal experimental conditions was ascertained using the quadratic model.     

An insight into the potent antioxidant activity of a dithiocarbohydrazone appended cis-dioxidomolybdenum (VI) complexes

In search of antioxidants with enriched potency, the present study focus on the design and synthesis of a dithiocarbohydrazone, H₃TCL derived from thiocarbohydrazide and 3-ethoxysalicylaldehyde and its coordination complexes with molybdenum, viz, [MoO₂(HTCL)D] ( 1 – 2 ) (where D = methanol ( 1 ), DMSO ( 2 )) and [MoO₂(HTCL)D]·DMF (where D = H₂O ( 3 )). The synthesized compounds were characterised by elemental analysis, spectroscopic techniques (FT-IR, UV–vis and ¹H-NMR), conductivity measurements and cyclic voltammetry. Moreover the solid state structures of all the three complexes were established by single crystal X-ray diffraction analysis as mononuclear neutral species in which the molybdenum centre assumes a distorted octahedral geometry. The dithiocarbohydrazone binds to the molybdenum centre through its phenolate oxygen, O(1), azomethine nitrogen, N(1) and thioenolate sulfur, S(1) in a dianionic tridentate mode. The assessment of intermolecular contacts in the crystal arrangement was quantified using Hirshfeld surface analysis. Further the antioxidant potential of the dithiocarbohydrazone, H₃TCL and its molybdenum complexes 1 – 3 were evaluated using 1,1-diphenyl-2-picrylhydrazyl(DPPH), 2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and total antioxidant assays. The antioxidant activities were then compared with standard antioxidant, L-ascorbic acid. The antioxidant potential of the synthesized compounds were then validated by molecular docking studies. Molecular modelling study was achieved to evaluate the recognition of target compound at the binding pocket of the human antioxidant enzyme, 3MNG. The docking results showed that the complexes selectively bond to the vital amino acids present in the binding pocket of the target enzyme, 3MNG.